SSK M.2 NVMe Enclosure, Tool-Free SSD Enclosure Adapter, USB C 3.2 Gen 2 10Gbps PCIe MKey External Solid State Drive Case, Support UASP Trim for 2230/2242/2260/2280 (SATA NOT Supported)

Description

Compatible with M.2 NVMe SSD based enclosure adapterPackage Included 1 M.2 NVME to USB 3.1 Type-C SSD Enclosure 1 USB C to USB C Gen2 Cable (10Gbps) 1 USB A to USB C Cable (10Gbps) 2 Thermal Pad 1 Screw Set : 2 screws (1*Scew A and 1*Screw B) Noticeuff1aInsert your NVMe SSD into the enclosure and connect to your laptopu2019s USB-C or Thunderbolt 3 port to transfer movies, music, and more at speeds of up to 10 Gbps. The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included.SSK USB C M.2 NVMe Tool-Free SSD Enclosure M.2 NVMe PCIE SSD Based SSK M.2 NVME SSD Enclosure adopts high performance controller Chipset RTL9210B, with high-speed data transmission speeds up to 10Gbps . 1GB file only takes1 second ; Attention: It supports PCI-E based M key M.2 NVME SSD read/write speed up to 10Gbps Only; Not compatible with B Key and B&M Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Tool-Free,No tool required Interface type: M.2 NVME to USB 3.1 Gen 2 Support SSD Drivers Size: 2230, 2242, 2260, 2280mm Cable 1 : USB C to USB C(150MM) Cable 2 : USB3.0 AM to USB C(150MM) Color: Silver Grey M.2 NVME PCIe M key Enclosure Adapter Only compatible with NVME M Key connectors Not compatible with B Key and B+M Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Attention: NVMe SSDs are not included. If youdon’t know which type is your SSD and you have any questions, please ask SSK Direct before purchasing.Main Features Easy Installation & Extreme Data Transfer Plug and play, no driver required. With USB 3.1 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 2.0 and USB 1.1.2* Thermal Pads included for Excellent Heat Dissipation Everything you need in one package, included 2* thermal pads, you can paste one thermal pad or two side by side to achieve rapid heat dissipation. Attention: Due to the nvme SSD extreme transmission speed, the temperature is higher than USB3.0 HDD, we tested ours is around 50 u00b0C in writing and below 40 u00b0C in reading, even after a long time R/W, the speed will not drop down or device will not shut down.Fashion Design Adopts aluminum alloy shell, Slim design, and excellent heat dissipation, be portable and easy to carry.It will be the best choice for trip and business travel.Main Features Tool-free design and fastest USB storage speeds! Tool-free design and no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports. Supports Plug & Play and Hot-Swapping.M.2 NVMe SSD Compatibility Compatible with M.2 NVMe SSDs Not compatible with B Key and B+M Key Connectors. M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs NVMe SSDs use exceptionally high performance storage media that will run hot when under load. The rubber SSD retention peg can be moved to support multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230.Multi OS Compatible Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones.Blue Indicator is always on when plug in, and flash when read or write data.Installation Instructions 1. uff30lease slid to open and take the middel frame out of the enclosure. 2. Place the SSD at and angle of 45 degress into the PCB. 3. Insert the fixing hole at the end of the M.2 SSD into the slot in the middle of screw B, insert screw A and tighten it. Otherwise, there will be large screws preventing the installation of the enclosure. 4. Put the thermal pad on the SSD,leave the sheet on the thermal pad. 5. Inserting in the direction of the arrow,the end with the hook goes slowly slide into the shell first. When you hear a bang, it means that it is locked Note: uff11.After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT. uff12. Pless kindly noted our item work well on all brands M.2 NVME PCIe 2230, 2242, 2260, 2280mm SSD up to 4TB including Intel 600p, 660p, Sumsung, WD, Crucial etc. If any question you have, please mail us, we will help you well. uff13.Not compatible with MacBook original SSDuff0e Thank you for your notice! According to the New USB-IF standard, the USB 3.2 specification replaces the USB3.0 USB3.1 specification and it introduced a new nomenclature, the USB 3.2 specification absorbed all prior USB 3.0/3.1 specifications, So, our 10Gbps USB C NVME SSD Enclosure, we can say USB3.1 Gen 2 or USB3.2 Gen 2(Old Nomenclature /New Nomenclature) USB 3.2 New Nomenclature: 1. USB3.2 Gen 1 = USB3.1 Gen 1 , Product transfer rate is up to 5Gbps, Marketing name: SuperSpeed USB 2. USB3.2 Gen 2 = USB3.1 Gen 2 , Product transfer rate is up to 10Gbps, Marketing name: SuperSpeed USB 10Gbps 3. USB3.2 Gen 2X2, Product transfer rate is up to 20Gbps, Marketing name: SuperSpeed USB 20Gbps

Applicable SSD: SSK M.2 NVME SSD Enclosure is compatible with NVME PCIe M Key connectors SSD for sizes: 2230/2242/2260/2280. It is not compatible with B Key and B+M Key Connectors. It does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Compatible with M.2 NVMe PCIe M Key Only. Note: NVMe SSD not included Aluminum Alloy Shell: Features a sleek and aluminum shell for optimal heat dissipation and portability. Includes 2 thermal pads and both USB 3.2 Type-C and USB 3.2 (Type-A) cable Tool-Free Design and Speed: 100% Tool-Free, quickly install and remove SSDs without any tools. M.2 NVME USB3.2 Gen2 Transfer speed is up to 10Gbps. Thunderbolt 3 compatible. One HD movie transfer only takes 2 seconds; Backward compatible with USB3.1 Gen1 and USB3.0 at respective speed limits. Thunderbolt 3 compatible Blue Indicator: Blue Indicator shows the data transfer status, easy and clear; SSD file system must be supported on host operating system to be accessible. As with all SSDs, new media must be formatted before use Master Chip: Adopts high performance controller IC Chipset JMS583, Complies with UASP, Trim which can effectively improve the speed and extend the longevity of SSD. Plug-and-play, no additional drivers required. Bus powered, does not need an external power supply. Compatible with Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC Please take care to check if your SSD is M.2 PCIE NVME otherwise it will not work. Please let us know if you are not sure if it is the right one. We will do our best to help you